Raspberry Pi 4 Case Fan

Manufacturer:
Flash-Turtle NO:
Package: Raspberry Pi 4 Case Fan
Datasheet: -
Stock: 1
Description:

In Stock

Please send RFQ , we will respond immediately.

Purchase & Inquiry

Transport

User guide

Purchase

You may place an order without registering to Flash-Turtle.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.

SPECIFICATIONS

Works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load

Introducing the Raspberry Pi 4 Case Fan

Detail

Features

Fits perfectly into the lid of the Raspberry Pi 4 Case
Temperature-controlled fan delivers up to 1.4CFM of air flow over the processor, memory, and power management IC
18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor

Getting started

Assembling your fan with your case
Remove any SD card, then put your Raspberry Pi into the lower half (base) of your case. Take care to align the mounting holes in the corners with the bumps in the case.
Insert the fan into the upper half (lid) of the case, with the green label facing away from the lid. Push gently but firmly so that the two tabs on the fan housing click neatly into place inside the tabs on the lid. The slightly curved edge of the housing should be flush with the underside of the lid.
If you are fitting the heatsink, remove the backing paper from the self-adhesive pad on the base of the heatsink, position it centrally over the processor, and gently press it into position.
Connect the three leads from the fan to the Raspberry Pi's GPIO pins, as shown in the diagram below. Take care to connect each lead to the correct pin.
Fit the lid of the case onto the base.

Case Fan Instructional diagram.png

Using your fan
Once you have connected your fan, by default it will be on whenever your Raspberry Pi is running. You can configure it to turn on only when your Raspberry Pi reaches a temperature that you choose.
Using a recent version of Raspberry Pi OS, first update to retrieve any recent changes to the operating system:
Open the Terminal, either from the Start menu (click the Raspberry Pi icon in the top left corner) or by pressing Control + Alt + T.
Type sudo apt update and then, when the update has finished, type sudo apt full-upgrade.
Then open the Raspberry Pi Configuration tool:
Click on the Raspberry Pi icon in the top left corner and select Preferences then Raspberry Pi Configuration.
Select the Performance tab.
Next to Fan, click Enabled.
If you have connected your fan as shown above, the default of 14 for Fan GPIO does not need to be changed.
Select the Fan Temperature at which you want your fan to turn on. The default is 80°C, which will stop the Raspberry Pi throttling on difficult tasks without having the fan on all the time.

Specification

Input voltage: 5V DC supplied via 40-pin GPIO header on Raspberry Pi 4
Fan speed control: Pulse width modulation control via user-selectable GPIO pin
Maximum airflow: 1.4 CFM Case material: Clear PC

Documents

Raspberry Pi 4 Case Fan - product brief

Compliance

CE and FCC declarations of conformity are available to view and download.
Global compliance certificates for Raspberry Pi products.

Obsolescence Statement

Raspberry Pi 4 Case Fan will remain in production until at least January 2026